 |
| Kicker Ramp |
| Step 1 Start out cutting these pieces. The actual part of the ramp is 1/4" MDF and the support pieces are scrap 1"X1" wood. |
| Step 2 Attach the support pieces to the two sloped MDF pieces. Make sure the support pices for the ramp are level with the ramp's grade. Also, be sure to predrill the holes to prevent splitting the wood. |
| Step 3 Attach the other piece of MDF to the top by predrilling holes into the support pieces (be sure not to run into an embedded screw) and securing with 1" drywall screws. A quick and easy project for a delightful ramp. It measures 5 1/2" high X 7" wide X 14" long. |
|
 |
 |