Graduation diploma

 

      š  I was the tutor of the following graduation diploma

 

 

Deoancă I. Mircea, Improving the performances of the didactical stand for study the pneumatical actuation systems, 2003

 

Sabau V. Vasile-Emanuel, The design and the command from the computer of a kinematical axis from the stucture of an writing system, 2003

 

 

 

 

        Improving the performances of the didactical stand for study the pneumatical actuation systems

 

 

The project consisted in study, design and realisation of a didactiacl stand for study the behaviour of various pneumatical components, most used in industrial applications. The stand includes 6 panel: for the preparation group, for the study of execution elements, fixed-cycle of positioning with two cylinders(two variants), for the experimental determining of the piston rod velocity under the various pressure and debit conditions and for the command of the 4 execution elements from the PLC.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The design and the command from the computer of a kinematical axis from the stucture of an writing system

 

The project consisted in study of the constructive solution used for physical materialisation of the informations readed through the transducers on the paper. It is shown two principles of writing on the paper. The solution seek was to reuse a pheripheral equipments who are actually moral out of the market, but functional as the writing system for various applications. The student focused on the dot matrix printer. The results shows that for certain applications(limitations are given by the fact that those kind of equipments are relatively slow) the solution proposed can be materialised.  

 

 

The information provided here is absolutely free; however the author will be glad to be noticed if you use these information for commercial purpose.