Introduction Specification Component DVD Audio

 

 

Audigy 2 Specifications

- Audio Performance

  • Signal-to-Noise Ratio with AES17 filter (A-Weighted)
     
  • Stereo Output 2V Rated output: 106dB 1V Rated Output: 102dB
     
  • Front and Rear Channels 2V Rated output: 106dB 1V Rated Output: 102dB
     
  • Center, Subwoofer and Rear Center 2V Rated output: ~90dB 1V Rated Output: ~86dB
     
  • Total Harmonic Distortion + Noise at 1kHz (A-Weighted) = 0.004% (1V, 2V Rated Output)
     
  • Frequency Response (+/-3dB, 24-bit/96kHz input ) = <10Hz to 46kHz (1V, 2V Rated Output)


    - High Definition Audio Quality for Playback and Recording

     
  • 24-bit Digital-to-Analog conversion during playback with sampling rates of 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz in 5.1 mode and up to 192kHz in stereo mode
     
  • 24-bit Analog to Digital conversion during recording in 8, 16 or 24-bit at sampling rates of 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
     
  • SPDIF (Sony/Philips Digital Interface) input at up to 24-bit/ 96kHz quality
     
  • SPDIF output up to 24-bit at 48 or 96kHz
     
  • ASIO drivers for low latency (=2ms) multi-track playback and recording at 16-bit/48kHz)


    - Wave-Table Synthesis and Midi Features

     
  • Creative Hardware synthesizer (2x16 Channels) with 64-voice polyphony featuring E-MU®'s patented 8-point interpolation technology for accurate sample reproduction
     
  • Creative Software synthesizer - multi timbral wave-table (16 Channels)


    - SB1394™ Connectivity

     
  • IEEE® 1394 / FireWire® / i-Link® compatible interface with up to 400Mbps transfer rate


    - Sound Blaster Audigy 2 On-Board Connectors

     
  • Line level out (Front / Rear / Center / Subwoofer /Rear Center)
     
  • Digital Out for 5.1 support (6-channel SPDIF Output)
     
  • Line in
     
  • Microphone in
     
  • SB1394™/ FireWire® port
     
  • Telephone Answering Device in
     
  • Analog / Digital CD Audio in
     
  • 15-pin MIDI / Joystick port extension header
     
  • Internal SB1394 header to Sound Blaster Audigy 2 Internal Drive (Upgrade Option)
     
  • AD_EXT extension header to the Sound Blaster Audigy 2 Internal Drive (Upgrade Option)


    - Sound Blaster Audigy 2 Platinum Internal Drive Front Panel Connectors

     
  • Headphone Out (1/4" Stereo Jack with Volume control)
     
  • Line In 2 (1/4" Stereo Jack, shared with Microphone In 2)
     
  • Microphone In 2 (1/4" Jack with Gain control)
     
  • MIDI In (mini DIN)
     
  • MIDI Out (mini DIN)
     
  • Optical SPDIF In and Out
     
  • Coaxial SPDIF In and Out
     
  • Stereo Auxiliary In (2 x RCA/Coaxial Jack)
     
  • SB1394 port
     
  • Infra-red Receiver
    • Hosted by www.Geocities.ws

     1