Cornfed Suspension for your Toyota Tundra |
The 2" size Cornfed Suspension lift spacers offer the perfect size lift to level your Tundra out, and give it the beefy 4x4 stance it deserves. Another setup you can use is the combination we used on the green Tundra below, we used a 2.5" front spacer and a 1.25" Cornfed Suspension steel rear lift block (Part # Tun-blk-kit). The trucks shown here have the following setups: The maroonTundra on the top has a 2.5" front spacers and the 1-1/4" rear block setup and is running 265/75r16's (32x10.5's) on Weld 16x8 Outback rims, and the green Tundra below has 2.5" spacers in the front and a 1-1/4" block in the rear and is running 285/75r16's (33x11.5's) on 16x8 American Racing AR-136 rims. Tundra front lift spacers 1.5" size Part # 2S-Tun-1.5" $140 + shipping/handling ($10 east coast/$15 west coast) 2" size Part # 2S-Tun-2" $150 + shipping/handling ($10 east coast/$15 west coast) 2.5" size Part # 2S-Tun-2.5" $155 + shipping/handling ($10 east coast/$15 west coast) Tundra full kit including front and rear lift This kit consists of a 2-1/2" front lift spacers and a 1-1/4" rear block kit or 1" Add-a-leaf setup for lifting both ends of the truck. Tundra full kit Part # Tun-2.5kit $215 + shipping/handling ($15 east coast/$20 west coast) Tundra rear block kit This kit is a Cornfed Suspension 1-1/4" block kit with u-bolts. 1-1/4" blocks Part # Tun-blk-kit $70 + shipping ($10 east coast/$15 west coast) For further information on ordering see the "Shipping/Ordering info" page or contact us at (757)218-6434 or [email protected] |