TV video | Camcorder | DigiCam | Media | Audio | Theater | Help | companies |
|
Stereo |
Stereo sound first came to the home in the early 1960s and revolutionized home audio entertainment. Compared to mono, two channel stereo sound was seen as a tremendous improvement, and stayed that way until Dolby Surround came to the video market.
| ||||||||||||
Dolby
Surround |
Dolby Surround first debuted in theaters in 1979 and was available in the home by 1982. These original home theater Dolby Surround decoders could only decode the left, right and surround channels. It wasn't until the early '90s that Dolby Pro Logic decoders appeared that could decode the center channel as well. Dolby Pro Logic surround is an analog (not digital) format, with the rear surround channels in mono only.
| ||||||||||||
Dolby Digital
5.1 |
Dolby Digital (originally known as AC-3) was first heard in theaters in 1992. The Dolby Digital specification for surround sound consists of five separate audio channels and a bass channel. Unlike Dolby Pro Logic, whose rear channels are mono and do not have the full dynamic range as the front set, Dolby Digital provides up to five discrete audio channels, all with full dynamic range. This means that with a 5.1 system you can hear the film as the director intended, with sounds all around you and thumping bass.
| ||||||||||||
Digital Theater
Systems |
DTS is also a digital 5.1 surround system, but the audio is far less compressed than Dolby Digital. DTS is therefore the choice of audio purists, although in a normal home theater set-up the difference may be difficult to detect. But as DTS is less compressed, few DTS DVDs have extras or foreign audio tracks.
| ||||||||||||
What Do I Need For Dolby Digital 5.1? | |||||||||||||
Your route into Dolby Digital will depend
largely on whether you already have any home theater
components, and how much money you have to spend. These
factors will determine which of the two routes below are best
for you.
| |||||||||||||
|
Identifying Dolby Digital and DTS audio: Icons A 5.1 soundtrack will contain six distinct channels of audio for the positions of left, center, right, left surround, right surround and the Low Frequency Effects (LFE, bass or ".1") channel. Unlike the analog Dolby Surround and Pro Logic formats, Dolby Digital has two independent surround channels. This means that a 5.1 system will give a far greater sense of depth and localization than a Pro Logic system. The LFE channel is a separate channel that allows the inclusion of low frequency bass sounds that are felt more than heard in the theater. The LFE channel can be routed to either a separate subwoofer or to all five speakers individually. If even Dolby Digital isn't good enough for you, consider a DTS compatible sound system. Also available, but much rarer, are DVDs with 5.0 Dolby Digital soundtracks. These discs offer the same 5 channel surround sound as 5.1 discs, but don't carry an LFE channel to provide the low frequency bass. DTS, full name Digital Theater Systems, made its debut in theaters in 1993 with Steven Speilberg's Jurassic Park. Like Dolby Digital, DTS is an audio codec (meaning to code/decode) that can allow anywhere between one channel (mono) and six channels (5.1 surround) of digital sound. However, DTS uses less than one quarter the compression of Dolby Digital, meaning a DTS soundtrack is much closer in quality to the studio master. DTS audio offers more subtle nuances, giving individual sounds superb clarity; better dynamic range, meaning the loudest bangs have more depth and the quiet passages are free of noise; and finally, improved channel separation across the 5.1 spectrum, for greater localization of sound around the room. But because it's less compressed, the DTS soundtrack takes up more space on the DVD, meaning DTS discs often come with fewer extras or foreign language tracks. Most DVD players available today will be able to handle DTS, either by using DTS Digital Out to pass the bitstream to an external amplifier for decoding, or by using its own internal DTS decoder. If you are interested in purchasing a player with DTS, or want to check whether your current player supports it, look for the DTS logo, such as the two below, on the player or refer to the player's instruction manual.
|
|
Found on DVD players without an internal DTS decoder. Found on DVD players and amplifiers equipped with a DTS decoder. |
Identifying Dolby Digital soundtracks on DVD Because DVDs can carry a variety of soundtracks in different languages and audio formats, it is important to identify audio content clearly on disc packaging. The Dolby Digital logo should be used along with a simple description of the audio format. For example:
|
Audio Connections for DVD soundtracks |
Audio connections can be either analog or digital. Analog
connections will typically be in the form of stereo (right and left) RCA
connectors, whereas digital connections will either use a single RCA
coaxial connection, or a single optical (toslink) connection. Different
sources will have different connection options, and some equipment does
not give you the choice of an analog or digital connection. If you are
unsure which connection options you have, please refer to your owner's
manual or the audio connectors on the back of you equipment. |