Known damage:
- Broken bracket on the back of the transmission (see
picture below)
- Headers are all smashed up. I wont use these so feel free
to lift the motor by them or lay it on its side or something.
- One motor mount is broken
One thing to make sure is NOT damaged is the case of the
trans at the location pictured below. I saw this black mark on the outside of
the trans and need to make sure it is not a crack in the case.
Make sure this isnt a crack in the case of the
transmission
|
|

List of important things to confirm:
- Ensure that the motor turns over (you will need a ½
ratchet and a xx socket)
- Check the motor mount area for cracks or damage
- Check the trans to motor mount area for damage
Items that should be included:
- Original Title (I will mail this back to him as soon as I
get the key ordered)
- Broken key
- Ignition key/lock tumbler (this is just a round cylinder
approx 2.5 diam with a black steel face at one end)
- Driveshaft flange (probably just a few inches long, might
be cut which is ok)
- There should be two computers, probably in a natural colored
nylon holder. Both should have a vin# sticker on them. These two
computers are uncoated aluminum and are approx 6x6x1
|
|
These are the two computers. They are probably in a
white case like this.
|
|



- There should be an additional computer that is much
smaller. This is a white, or light grey plastic box with green writing
(might be black writing), no vin information. Approx 1x2x4

- Headlight switch (black box approx 3x2.5x5)


Additional items he was going to throw in include:
- Intake tube (approx 3.5 diameter black plastic tube that
is about 10 long)

Southampton Imported Cars
1891 Route 38
Southampton, NJ 08088
609-267-8384
Ask for Collin
Hours are 8:30am 6:00 PM. He can stay later if needed,
just call him ahead of time.
Click below for a map.
http://maps.yahoo.com/#gid1=10905755&q1=1891%20ROUTE%2038,%20Southampton,%20NJ,%2008088&mvt=m&trf=0&lon=-74.808655&lat=39.998822&mag=6