Cokin Filter System     |     home   |    Cokin Users Guide    |   Graduated filters    |    Questions
Striking Graduations
660, 661  Fluo Yellow
662, 663  Fluo Orange
664, 665  Fluo Red
666, 667  Fluo Blue
668, 669 Fluo Mauve
670, 671  Fluo Pink

Fluo Graduated Filters are For full color explosions.

 Jean Coquin found graduated filters too normal and not striking enough for creative purposes, so he created a second series. They can be recognized by the description "Fluo" (florescent) and are used as effects filters. Although the same color names are used as with the normal graduated filters, they produce brighter, more luminous colors in yellow, orange, red, blue, pink and mauve. These filters are useful for photographers who may have problems with colored polarizers, which always tone the whole picture with one or two colors. Precisely controllable color moods, which formerly were rarely seen outside of pop videos, are easy to achieve with these "fluo" filters. Technically, they are handled exactly like the other graduated filters. They come in a weak and a strong compound color just like the other grad's . Low # is the weak color and the high # is the the stronger color.

*When using color-print film and using filters to apply special colors to your images, notify your Photo-finishing agent. Most use computerized printers today and these will try to color-correct to operator input standards, thus possibly removing what you have added.

All of the photos on this page and this entire site will remain the exclusive property of their original owners. No photo may be reproduced or used in any way without the authorization of the owner.


On line Cokin Filter catalog

 "The only problem with using colored Cokin filters is that the sky will be one color and the bottom portion of the image will be another color (ie: the sky is "pink" and the water is "blue". Photo buyers will generally reject images like this as they do not appear "REAL". To make this image look "real", simply put a 1 stop colored filter upside down to color the bottom portion of the image. Then put a 2 stop (or whatever density you want) on the camera in the "normal" fashion. This will give you the most realistic image!!"
Good advice from Darwin A. Mulligan






                                                                                                                                                                                                                                                                                                           
Hosted by www.Geocities.ws

1