|
|
WorMania.com |
Industrial Size Vermicomposting Systems
Large scale systems designed to
process 100 to 600 pounds of organic waste daily are now available.
These systems are
modular in design and are available in 6 sizes.
 |
|
Specifications
-
Each module is made from 2-inch tubular steel, which supports a grate system capable of holding 2 tons of material.
-
The grate is constructed of heavy welded wire and galvanized.
-
Power requirements: 110-volt single phase with a GFI circuit.
-
The clean out mechanism uses 2 each 110V. Electric winches.
-
Worm population: 100lb per 8 ft increment. Startup should be no less than 50 lb. per 8 ft increment.
-
All components are powder coated for a long lasting finish.
-
Optional lids and ventilation systems are available.
Benefits and Features:
-
Flow through design- Organic waste in on the top and finished Vermicompost out the bottom provide 95% worm free. 90% of the worm population will be found in the top 4 inches of the worm bed. Harvesting begins 6-8 weeks after setup.
-
Year around use, 365 days a year.
-
Highly aerobic conditions are easily maintained
-
No loss of nutrients due to seepage into the ground.
-
No need to turn materials
-
After initial inoculation no further worm population will be needed. The population will propagate and maintain ample populations of worms to process the organic feedstock.
To determine the correct size of machine an accurate survey of daily waste to be processed will be required.
The machine will need to be indoors in a heated environment for winter use. Minimum temperature should be no less than 50° F. No direct sun. Optimal temperatures 70-80° F. A concrete or asphalt floor is required.The processing capacity is dependent on the aerobic condition of the organic waste being processed and type of materials in the system.
**** Delivery time is 30-45 days from the order date. Pricing available upon request ****