Scooter Lift Specifications

Double Entry Lift (9OO-DE)

• Carries most 3-wheeled and 4-wheeled scooters that do not exceed 325 lbs. 4-wheeled scooters must be less than 27" wide and have a wheelbase of 36" or less. 3-wheeled scooters must be less than 26" wide, and have a wheelbase of 41"" or less with a minimum wheel diameter of 8".
• Allows accessibility from either side of lift.
• Corrosion resistant, brushed aluminum rails. (2) 8" x 47 1/2" and (1) 6" x 47 1/2"
• Overall weight (without accessories): 106 lbs.

Single Entry Lift (8OO-SE)

• Accommodates smaller scooters with a wheel diameter of less than 8". Will carry 3-wheeled scooters with a maximum width of 26", a wheelbase of 36" or less, and a maximum weight of 325 lbs.
• (1) Corrosion resistant, brushed aluminum platform with center rail.
• Overall weight (without accessories): 112 lbs.

Quad XL Lift (500-XL)

• Carries many oversized 4-wheeled scooters with a maximum width of 27", a wheelbase of 36" to 39", and a maximum weight of 325 lbs.
• Corrosion resistant, brushed aluminum rails with steel supports. (2) 8" x 54"
• Overall weight (without accessories): 116 lbs.

Specifications:

• Heavy duty 12 volt DC motor: 35:1 gear ratio. Draws 8 amps under full load.
• 12 volt DC battery: Comes with 110 volt AC charger. Up to 150 cycles per charge.*
• Mechanical clutch/brake: Key-switch operation, no electrical switches. Comes with personal set of keys.
• Bolt-on hitch attachment: Allows lift to be easily transferred to other vehicles.

Available Accessories:

• Hardwire Kit: Lift can be wired directly to the vehicle's power source as an alternative to the on-board battery.
• Swing Away Joint: Allows access to the vehicle's trunk or tailgate, or rear doors on pick-ups, SUV's, or minivans by allowing the lift to be repositioned to the vehicle's side.
• License Plate Kit: Bolt-on frame relocates the vehicle's license plate for better view.

* Tested with 325 lbs. in ideal conditions. Number of cycles will vary depending on scooter weight, and climate.