 |
 |
| USING THE SYSTEM |
| PLUGGING IN THE LEDS |
 |
| When plugging and unplugging leds from the sockets, grasp the sockets firmly near the tips of the sockets. Plug red leg of led into red covered socket. Plug silver leg of led into black covered socket. (see photo c) |
 |
| 1. Plug in leds into the hot swap sockets. 2. Install the light system on your cars body according to Xmods instructions. 3. Plug in your light system into your car. (see photo a) 4. Turn your car and controller on. (see photo b) 5. Your light system will light up. |
| The Tailpipe Modification |
 |
 |
 |
 |
| The tailpipe is not included. They are part of the Xmods body kits. |
| In most cases the tailpipe leds will press into the hollowed portion of the tailpipe with a snug secure fit. |
| If the tailpipe led is loose inside the tailpipe, help secure it by using some sticky tack provided in the kit. Just insert led into tailpipe then plug up rear of tailpipe with the sticky tack as shown. |
| INSTALLED |
| It is easier installing the headlights in some cases by first removing the front bumper/air dam prior to installation. Once the headlights are in the put the front bumper/air dam back on. |
| TIPS |
| You should secure wires in place using adhesive tape after installing your light system. |
 |
| THE HOT SWAP COMMAND LOGIC LIGHT SYSTEM |
| THE HEADLIGHTS |
 |
| Not only do you receive the modified Xmods Command Logic Light set, but you will receive 7 interchangable headlight leds to customize the look of your cars headlights. WHITE BLUE PINK UV/PURPLE GREEN AMBER ORANGE |
| Headlights brighten when accelerating forward and reverse. |
 |
| THE TAIL LIGHTS |
 |
| Tail lights brighten when braking. |
| THE TAILPIPE LIGHTING ASSEMBLY |
 |
 |
 |
| Tailpipe light assembly has also been added to the Xmods Command Logic Light Set. This will allow you to modify your tailpipe with led lighting giving you even more lighting possibilities for your Xmod. |
| Tailpipe brightens when accelerating!!! |
| Not only do you get the tailpipe wiring assembly but you will also receive 3 interchangable tailpipe LEDS. BLUE PINK GREEN |
| Note: The tailpipe and fog light leds will not work with AMBER and ORANGE headlight leds plugged in. If using the tailpipe led or fog lights, please select one of the other headlight colors. |
| ???QUESTIONS??? |
| If you have any questions regarding the system, please contact me at: [email protected] |
|
| The Xmods Command Logic Light System modified with headlight Hot Swap Sockets and tailpipe lighting harness. This modified system allows you to quickly swap between a variety of colors further allowing you customize the look of your car. A tailpipe lighting harness has also been added. This will give you modifiers out there a simple way to create those illuminated tailpipe effects. |