 |
|
|
|
|
|
|
|
|
|
|
|
|
| USING YOUR SYSTEM | ||||||||||||
 |
||||||||||||
 |
||||||||||||
| When plugging and unplugging the leds from the sockets, grasp the sockets firmly near the tips of the sockets as shown. Plug red leg of led into red covered socket. Plug silver leg of led into black covered socket (see photo c&d). | ||||||||||||
| Be sure you have fresh or near fresh batteries in your car. 1. Plug in leds. 2. Attach the lighting system circuit boart to the underside roof area with the supplied screw(s). 3. Insert leds into their appropriate holes on body and secure with tape or adhesive. 4. Secure wires to the body using tape. 5. Plug in the lighting system into the plug on the top of car chassis. 6. Attach body to the cars chassis. 7. Turn on car and controller and the lighting system will come on. |
||||||||||||
| You may want to use black electrical tape around the back part of the leds to help prevent stray light from coming through the wheel well area. | ||||||||||||
| Click to return to main page | ||||||||||||