/------\
| |=S2
S3=|10:01:00|=S1
\______/
Alarm or chime on/off :
In normal time: Hold S1-Button and Display shows alarm time in Hour and Minute
1 x Push S2-Button: Chime Bell will be on.
2 x Push S2-Button: Alarma mark will be on.
3 x Push S2-Button: Chime Bell will be off.
4 x Push S2-Button: Alarma mark will be off.
Release S1-Button and Display changes to normal time immediately.
Chronograph mode :
In normal time: Push S3-Button, chronograph function will be displayed.
Pressing S3-Button again will return to normal time.
Start/Stop: Push S2-Button, it operates in cumulative counting up to 1/100 second.
Lap time:To display lap time when chronograph is running press S1-Button
The chronograph will continue to run while the lap time is displayed.
To go back to the running chronograph mode press S1-Button again.
Reset: Push S2-Button to stop counting and then push S1-Button to reset zero.
Alarm Time Setting :
In normal time: Hold S3-Button about three seconds.
Monday flag + Hour digit will flash.
Pressing the S1-Button will advance the Hours.
Press S2-Button to change minute setting.
When the minute digits are flashing, Press S1-Button to change the minutes.
After settings the minutes, press the S3-Button to return to normal time.
Normal Time Setting :
In normal time, hold S3-Button about three seconds and then push S3-Button once.
Tuesday flag + second digits will flash.
Push S1-Button and seconds will be reset to zero.
1 x Push of S2-Button: Minute digits flash and advance by depression of S1-Button.
2 x Push of S2-Button: Hour digits flash and advance as above.
3 x Push of S2-Button: Month digits or Date digits flash. It depends on their position and advance as above.
4 x Push of S2-Button: Month digits or Date digits flash and advance as above.
5 x Push of S2-Button: Flag of weekday flashes and advances as above.
Push of S2-Button and second will start for setting again.
If S3-Button is pushed during any time change Normal Time will resume on display.
12/24 Hours Reversal Option:
In normal time, hold S1-Button and then push S3-Button.
Hour digits will reverse and the A.M. or P.M. mark will apear or disapear.
12 Hours mode A.M. or P.M. will be present on the display.
Alarm test :
Hold S1-Button and then hold S2-Button together.
Alarm will "Beep" and Alarm sounded.
Alarm sound off :
For "Beep, Beep" Alarm Push of S1-Button.
For Alarm push of S3-Button.
Month/Date position Interchange:
In normal time mode, Hold S2-Button.
And then Push S1-Button.