Best printed with .75" borders

(The numbers on these diagrams aren't real clear, but hopefully they're legible)

You'll need 2 sheets of 4' x 8' Melamine coated pressboard.
From the first sheet cut out the following:

From the second sheet cut out the following:

From the 1/2" and 3/4" plywood cut out the following:
(This is the divider so only needed if you plan to divide your cage as we did. The divider itself is cut from 1/2" plywood while the divider guide is cut from 3/4" plywood.)

The measurement for the divider is ~4' 1½" x 1' 11" (it's hard to read)