I'm Chanel Eliz.

ICT/Robotic is about

---

Infpormation and communications technology(ICT) is an extensional term for information technology (IT) that stresses the role of unified communications and the integration of telecommunications (telephone lines and wireless signals) and computers, as well as necessary enterprise software, middleware, storage, and audiovisual systems, that enable users to access, store, transmit, and manipulate information.While robotics is a branch of engineering that involves the conception, design, manufacture, and operation of robots. This field overlaps with electronics, computer science, artificial intelligence, mechatronics , nanotechnology and bioengineering.

My Knowledge

Programming

Web Design

Case studies

Download Resume

My Grades

My Video

Traffic light A case study

These are the steps on making my traffic light. First, gather every material needed(Junk core,usb connector,RGB LED,4-pin wire,sensor).Second,connect the usb connector to the junk core then connect the core on the laptop.Third,after making sure that the core is connected.Connect the 4-pin wire to the LED then connect to the junk core.After,making sure that connector start programming (as shown above).Then,the LED should show red and green light.Sixty,connect the sensor to the 4-pin wire then start programming.Then,start programming the sensor (as shown above). And,you're done. The purpose of this traffic light case is to depict the uses of traffic lights.It should also show the two colors which are green and red that means go and stop. the purpose of the sensor is to measure the distance of the car and warn the core so the core will make the LED light to the appropriate color. The measure of the distance is shown in a junkbot character.

Smart Security Alarm System A case study

This study is all about SMART SECURITY ALARM SYSTEM.I made this project for us to know how to make a system that can help us feel safe or secure in our homes. The materials needed on this project are (1) 3-pin wire,(1)4-pin wire, junk core,usb cable,buzzer and Ultrasonic sensor. First, you should connect the junk core to the laptop. 2nd, connect the buzzer and sensor to the junkcore using the wires. The buzzer should be attached to B3 while the sensor should be attached to B1. 3rd, start programming the program I showed at the video. Then, try the sensor if it detects the sound waves. The green part on the program is used for the sensor to detect whether its 1-1000 cm away of the sensor. the sensor should detect the thing by its sound wave depending on the distance you encode.The security smart alarm system shouldn't make a continuos loop. The Secury system should be sensitive about the sound waves if it didnt work then there's problem with your sensor or program. I hope you will also try encoding and making an alarm system for us to have knowledge of installing an alarm system that we might use in our future homes.