To Pursue graduate studies and work towards doctoral thesis with the aim of
providing significant and innovative contributions in my field.
Education
Current : Graduate student in the Dept. of Engineering Science and Mechanics at PENN STATE UNIVERSITY
Undergrad (Dual degree)
: Bachelor of Technology in Manufacturing Science and Engineering and Master of Technology in Industrial Engineering and mgmt. at INDIAN INSTITUTE OF TECHNOLOGY, KHARAGPUR
CGPA : 8.47/10 (CGPA of Last two years -
9.09/10)
ICSE (X th) :
88%
CBSE (XII th) : 79.2%
Project Work
Bending Of Thin Sheets Using Continuous CO2 Laser,May-04 - May-05
Developed an analytical model for the calculation of bending angle
Experimental and theoretical analysis of different factors involved in the process
A technical paper based on the findings to be submitted to the Journal of Materials Processing Technology.
Laser Bending Of thin Tubes,July-03 - May-04
Aimed at studying the process and analyzing the relationship between
Bending angle & Energy per Pulse, Pulse-On time, Number of pulses, Spot size
of the Laser beam.
Designed and Fabricated a computer controlled experimental set-up in order
to study the bending of thintubes(thicknesses-0.132mm,0.143mm
and 0.16mm)
Solved the Navier's Equations of Thermoelasticity in a cylindrical
coordinate system in order to formulate the 3D transient Thermal stresses
using the Thermal Stress Function technique.
Numerical simulation of the
thermo-mechanical process using the ANSYS finite element code
A technical paper was presented at the All India Manufacturing technology design and research conference,India,Dec 2004.
Volumetric Deviation in Direct Slicing with First Order
approximation,Jan-03 - Jan-04
Proposed and developed a new method to calculate Volumetric deviation
using a novel reconstruction of the 3D Part Model to be built using
Rapid Prototyping Technology.
Developed an efficient algorithm for finding the points on the upper and
lower slices lying on a 3D CAD model surface.
A technical paper based on the results and findings was published in the Rapid Protoyping Journal (For Details see 'Publications / Papers under review').
Angular Distortion in Single Fillet Welded T
joints,Jul-02 - Dec-02
Aimed at analyzing the relationship between the angular distortion & Leg
length, electrode diameter, preheating, stress relieving, backstep welding.
Developed a new technique to measure the magnitude of the angular
distortion.
A technical paper was presented at the National Welding Conference(organised by Indian Institute Of Welding),2002,Kolkata.
