| NOW WE CAN BUILD SOME "268 STICKS" SHOOTING STICKS |
| MATERIALS LIST FOR ONE SET OF "268 STICKS" 1. TWO CARBON ARROWS 2. 4 ARROW INSERTS 3.TWO OR FOUR FIELD POINTS 4. CASTRATION BANDS 5. FLAT SPRAY PAINT 6.GLUE for arrow inserts |
 |
 |
 |
 |
 |
 |
| HERE IS EVERY THING YOU NEED TO MAKE SOME "268" STICKS |
| TWO CARBON ARROWS try to get the higher spine weights 35/55 was all I could get this day |
| FOUR ARROW INSERTS ONE FOR EACH END OF EACH ARROW |
| FOUR FIELD POINTS ONE FOR EACH END OF EACH ARROW |
| SOME MAY ELECT POINTS FOR ONLY THE BOTTOM OF THE STICKS IN THIS CASE YOU ONLY NEED TWO FIELD POINTS |
| CASTRATION BANDS I GET THEM AT THE FEED STORE $1.25 PER 100 |
| GLUE TO GLUE THE INSERTS IN THE ARROWS IF YOU HAVE YOUR PRO SHOP DO THIS YOU DONT NEED IT |
 |
 |
 |
 |
| GLUE THE INSERTS INTO EACH END OF THE ARROWS OR HAVE THEM DO IT AT YOUR ARCHERY SHOP |
| SLIP THREE CASTRATION BANDS ONTO ON END OF THE ARROWS. THREE SEEMS TO WORK BEST BUT YOU CAN EXPERIMENT YOURSELF |
| SLID THE BANDS DOWN ABOUT 8 INCHES. THEN SET DOWN WITH YOUR RIFLE OR SHOTGUN AND FINE TUNE THE HEIGHT |
| IF YOU WANT TO GO PRONE PUT POINTS IN THE TOP OF THE STICKS AND ALL YOU HAVE TO DO IS FLIP THE STICKS OVER |
| EASILY ADJUST THE HEIGHT OF THE STICKS BY ROLLING THE BANDS UP AND DOWN THE STICKS WITH YOUR HAND QUIET AND QUICK |