ZTE BTS Details

Whats New

Helpline

FAQ

Profile

Photo

ZTE BTS SWITCHING ON SEQUENCE

Please ensure the cable connectivity and DIP switch settings before Power ON

1

TEMP / HUMIDITY SENSOR

Connect at HYGRO THERMO

2

SMOKE SENSOR

Connect at SMOG

3

CDSU TO CDSU ( Stream Cable) ** CONNECTIVITY

Connect at HIRS_120_E1

4

SHELF I.D.

5.A

PATH I.D –

FOR CDSU – DT.0 & DT .1 at BSC

5.B

PATH I.D –

FOR CDSU – DT.2 & DT.3 at BSC

6

POWER ON

6.A.

     MCB SWITCH ON

6.B.

     FAN

6.C.

    GPSTM CARDS

6.D.

    PPM SHELF

6.E.

    BDS SHELF

WAIT FOR THE CLEARANCE OF ALL ALARMS IN GPS SHELF

7

HPA

** Blue . Receive Pink . Trans

ZTE- Model WP 805 A – FWT

Telephone Instrument Programming – a guide.

Switch on the Power Switch of the FWT

Press EXIT key for few Seconds ( On/Off Switch)

- BSNL Display appears

Enter *983*9559# - Menu option opens.

Select options by scrolling up / down keys.

0 - MCC Enter 404 and Save

1 - MNC Enter 00 and Save

2 – MIN Enter the Telephone Number and Save

Ex. : BSC Type WLL – 0002090000

MSC Based WLL – 4272910000 (With Area Code)

3 – SID / NID – 20 times

Ex. : BSC Type WLL 2222 / 15

MSC Based WLL 14513 / 15 and Save

4 – PRI CH A – Enter 42 and Save

5 – PRI CH B – Enter 83 and Save

6 – SEC CH A – Enter 42 and Save

7 – SEC CH B – Enter 83 and Save

Note : CH A – 1^st Channel

CH B – 2^nd Channel

Programme over and finally Switch Off and Switch On.

Display appears with Time and Date etc.

Note : 1. Exit Key will help you to come our from display from the screen.

2.     Press Menu – To see various Option / Facility.

      Refer User Manual supplied

3.     Security Settings / Reset Settings should not be disturbed on

       Any cost.

4.     RingTone Type / RingTone Volume / Speaker Volume.

      Option in 3-2 EDIT PROFILE ( 3-2-1-1, 3-2-1-2, 3-2-1-3)

      To Check the ESN Number :   *#06#

      To Check the RX Level       :   *983*638#