ANALYSIS BOX
This is an instrument designed to give the answer of any question as a numerical readout between 0 and 100.� It is useful for finding out such things as the percentage of a color in someone's aura or the strength of a radionic transmission.
To make this instrument you will need:
A printout of the pattern
18 ceramic magnets (usually available from Radio Shack)
1 Potentiometer (value unimportant)
1 piece of aluminum foil
1 cardboard box
1 length of wire
1 knob
1 plastic can lid
Making the instrument:
1.� Glue the pattern to the top of the cardboard box.
2.� Punch a hole for the stem of the potentiometer at the center of the large, calibrated area.
3.� Punch a small hole at the center of the box marked Witness.
4.� Attach the wire to the potentiometer at any of its points.
5.� Attach the potentiometer to the box so that the stem comes out the center of the calibration.
6.� Bring the wire out through the center of the witness box and lay it flat in the box.� Cut any excess.
7.� Glue the foil square over the witness box.
8.� Attach the knob to the potentiometer stem.
9.� Glue the ceramic magnets to the small circles around the central circle.
To use this instrument:
1.� Decide what it is you want to know, such as the amount of blue in the aura of a friend.
2. Place the witness of the subject to be analyzed on the foil plate.
3. While turning the knob, rub the plastic lid with your thumb until you get a stick (you will know it when it happens).
The numerical reading on the dial will be the answer to your question.
