Pirate/Skull Invite Tools needed PSP- I used version 9 but it should work with all. Filters- Filter Factory Gallery U-Digital Weaver Xenofex 2-Burnt Edges  Tube of choice- I used to work of Half Pints who is a PTU artist. You MUST have a license to use this work and you can purchase the art from MPT.  Scrapkit- Shiver Your Timbers or Scrap of choice The scrapkit I used was made by Kirsty and can be found at Designer Scraps Font of choice or the one I used which is called NumbSkull49 Ok.Lets get started.. 1. Open a new image 600 X 600 and flood fill with white 2. Open up a paper of choice and copy and paste as a new layer. 3. Resize by 70% and use the following settings from FilterFactory Galler U-Digital Weaver 4.Now add a burnt edge to it. I used Xenofex 2 Burnt edges with the following settings 5.Open up the PaperBurn2 and copy and paste as a new layer, resize if necessary. I resized by 70% 6. Open up wordart of choice, resize by 50% and place into position. 7. Add your text of choice. I made mine into a Pirate Party Invitation. 8. Add some bows to your tag, I used Bow 4 from the kit(black with eyelets) and place them on the side connecting the paper to the background 9. Copy and paste the pin as a new layer resizing by 50% then 70% position on the edge of your tag,erasing any bits you dont want 10. Copy and paste your charms, resize and position on to the pin, and as above erasing any bit you dont want. 11. Now choose a skull of choice, resize and position it below your text but above the burnt paper. 12. Add any other embellishments to your tag, I used a button and some bows. 13. I added som gems and placed them into a sort of border down the bottom, you do not have to do this if you dont want to. 14. Add your �Information 15. Add your name and anything else 16.Crop and resize 17.File SAVE AS. YOUR DONE! This Tutorial was written on the 1st April 2008 by Mell aka Babylicious36 This tutorial is written using my imagination and is in no way copied from any other tutorial. Please do not Steal.. You may print this out for future use. This page was assembled by Mell aka Babylicious36 Artwork �HalfPints.CEI www.ceistickers.com MPT6179