Its A Spring Thing

Tools needed

PSP- I used V8 but it should work with all.

Tube/s of choice- I used the wonderful work of Joel Adams..Please do not use his work unless you have a license to do so.You can purchase his work from CILM

Font of choice- I used BadaBoom BB which can be found at 1001fonts.

Scrapkit- I used a scrapkit called Its A Spring Thing which was made by Missy from Misfits Scraps. It can be downloaded from the link HERE. I have Missy's permission to post the download link.

Ok.Lets get started..

1. Open up a new image 550 x 5500, flood fill with white

2. Open up 2 papers of choice from the scrapkit

3. Copy and paste 1 paper on to your working canvas

4.Copy and paste 2nd paper on to working canvas resizing by 90% and rotating left 45degrees.

5. Duplicate 1st paper and bring above the 2nd paper, resize by 80%.. do not rotate

6. Duplicate the 2nd paper and bring it to the top resizing by 70% and rotating left 45 degrees

7. Keep doing this until you are down to 40%. Every Second paper should be rotated by 45 degrees left.

8. On the first paper(all)-drop shadow with 2,2,80,5 Black

9. On the 2nd paper(all) drop shadow with -2,-2,80,5 Black

10. Now open up frame of choice. resize and paste as a new layer.

11.If using the double frame select inside one side with your magic wand, Selections, modify by 5.

12. Resize tube and copy and paste as a new layer..Position.

13. On the frame layer, selections invert and click delete on the tube layer.

14. Repeat steps 11,12 and 13 if using the same frame i did.

15. Copy and paste any embellishments of choice.

16. Copy and paste word art, resize and position.

17. Text time- I used the font BadaBoom BB, Size 72. 1.0 width Black(foreground) and colour choice for background.

18 Type your name and click okay, position and stretch to liking, convert to raster.

19. Add some noise if you want..

20. Dont forget to add your �Information and watermark.

Thankyou for trying my tutorial

You're Now Done!

This tutorial was written on the 24th February 2008 by Mell aka Babylicious36. This tutorial is written using my imagination and is in no way copied from any other tutorial. Please do not Steal.. You may print this out for future use.

This page was assembled by Mell aka Babylicious36

Artwork �Joel Adams www.lilz.net CI-1060LM