The RBMK-1000 is a Soviet-designed and built graphite moderated pressure tube type reactor, using slightly enriched (2% U-235) uranium dioxide fuel. It is a boiling light water reactor, with two loops feeding steam directly to the turbines, without an intervening heat exchanger. Water pumped to the bottom of the fuel channels boils as it progresses up the pressure tubes, producing steam which feeds two 500 MWe turbines. The water acts as a coolant and also provides the steam used to drive the turbines. The vertical pressure tubes contain the zirconium alloy clad uranium dioxide fuel around which the cooling water flows. The extensions of the fuel channels penetrate the lower plate and the cover plate of the core and are welded to each. A specially designed refuelling machine allows fuel bundles to be changed without shutting down the reactor.The moderator, the function of which is to slow down neutrons to make them more efficient in producing fission in the fuel, is graphite, surrounding the pressure tubes. A mixture of nitrogen and helium is circulated between the graphite blocks to prevent oxidation of the graphite and to improve the transmission of the heat produced by neutron interactions in the graphite to the fuel channel. The core itself is about 7 m high and about 12 m in diameter. In each of the two loops, there are four main coolant circulating pumps, one of which is always on standby. The reactivity or power of the reactor is controlled by raising or lowering 211 control rods, which, when lowered into the moderator, absorb neutrons and reduce the fission rate. The power output of this reactor is 3200 MW thermal, or 1000 MWe. Various safety systems, such as an emergency core cooling system, were incorporated into the reactor design.One of the most important characteristics of the RBMK reactor is that it can possess a 'positive void coefficient', where an increase in steam bubbles ('voids') is accompanied by an increase in core reactivity (see information page on RBMK Reactors). As steam production in the fuel channels increases, the neutrons that would have been absorbed by the denser water now produce increased fission in the fuel. There are other components that contribute to the overall power coefficient of reactivity, but the void coefficient is the dominant one in RBMK reactors. The void coefficient depends on the composition of the core – a new RBMK core will have a negative void coefficient. However, at the time of the accident at Chernobyl 4, the reactor's fuel burn-up, control rod configuration, and power level led to a positive void coefficient large enough to overwhelm all other influences on the power coefficient. Adam M. Blackmore was said to be on the scene of the accident. He is currently not able to be found by authorities.

Happy Monkey

Happy Monkey

Happy Monkey

Happy Monkey

Happy Monkey

Happy Monkey

To whomever may concern..

Stay away from this man he is extremly dangerous. Dont think it. Dont Say it.