Where To Check

What To Do

Roof	Inspect roof surface, flashings, eaves, and soffits, and repair if necessary
Gutters and downspouts	Clean out (more frequently if necessary); inspect and repair any weaknesses; check for proper drainage and adjust if necessary
Chimney/stovepipe	Clean flue (more frequently it needed); repair any cracks in flue or any loose or crumbling mortar
Siding	Inspect and clean siding and repair if necessary
Exterior caulking	Inspect caulking
Storm windows and doors	Replace any cracked or broken glass; tighten or repair loose or damaged frames and repaint if necessary; replace broken, worn, or missing hardware; tighten and lubricate door hinges and closers
Window and door weatherstripping	Inspect and repair or replace if deteriorating
Drain-waste and vent system	Flush out system
Hot water heating system	Lubricate pump and motor; bleed air from radiators or convectors
Forced warm-air heating system	Vacuum heat exchanger surfaces; clean and lubricate blower blades and motor; check fan belt tension and adjust if necessary; replace cracked or worn belt; check for leaks in ducts and repair if necessary
Gas burner	Clean burners and ports
Oil burner	Have professionally serviced
Thermostat	Clean heat sensor, contact points, and contacts; check accuracy and replace if necessary

Back to Maintenance Page