A purebred racing pump, the Granatelli Signature Series RX-1500
can feed a 1700 horsepower engine. It can deliver 900 lbs. of fuel per
hour at 45 psi, with maximum outputs of 70 psi and 150gph. Important technical
features of the RX-1500 include an extruded aluminum "heat sink" body,
roller vane impeller design and stainless steel electrical terminals. This
black anodized, CNC-machined beauty has built-in mounting pads to facilitate
installation, and accommodates AN-12 inlet and outlet lines. Use two Paxton
fittings (#3002438) for ease of installation.
Kamikaze 750 Electric Fuel
Pump
(part # 8002636)
This compact, powerful pump was designed for electronically fuel injected
engines. It can flow nearly 400lbs. Of fuel per hour at a constant rate
of 45 psi, and can sustain up to 750 horsepower. Important features
of the Paxton "Kamikaze" pump include a special roller vane impeller design,
"heat sink" styled case to help maintain lower fuel temperatures, and stainless
steel electronic terminals for extended reliability. The "Kamikaze" accepts
an AN-8 inlet line and an AN-6 outlet line. Paxton's fuel fittings (#80024431)
and (#8002430-1) are recommended for ease and quality of installation.
The pump has integral mounting feet built into the case.
Granatelli Signature Series
Fuel Pump
(part # 8001688)
Engineered for highly modified E.F.I. equipped engines, the Granatelli
Signature Series is the industry's most efficient continuous duty pump
and can deliver a sustained flow of 550 lbs. per hour at 45 psi. It can
support engines producing up to 1100 horsepower! It features a unique
"heat sink" body that's extruded out of 6061-T6 aluminum alloy, and helps
lower fuel temperatures and C-N-C machined to exacting tolerances. The
roller vane impeller design can deliver up to 70 psi fuel pressure, and
stainless steel electrical terminals assures outstanding durability. The
pump housing includes integral mounting pads, and installation is simplified
through use of Paxton's fitting kit #8002460. Inlet/outlet thread size
is AN-10, with a -10 feed line recommended.
