Toyota EFI trouble codes for 4K-E, 22R-E, 2S-E (probably also all others)
1 All OK
2 AFM Vc open Vc / Vc-VS, open Vb AFM Vc/Vs, wiring, ECU
3 AFM Vs open Vs, Vs-E2 short, open Vb AFM Vb/Vc/Vs, wiring, ECU
4 THW THW open Coolant sensor, wiring, ECU
5 O2 Ox stuck rich/lean Oxy sensor, wiring, ECU
6 IG no ignition signal ignition, wiring, ECU
7 TPS Idl/Psw short TPS, wiring, ECU
8 THA open/short intake temperature sensor
9 SPD speed sensor just leave it disconnected -
it's for speed limiter only.
10 STA starter signal
11 A/C air conditioneer switch, TPS or neutral start switch
How to read the codes?
1. turn ignition on, but don't start the engine
2. short the check engine connector (or between T and ground)
3. check engine light will now blink indicating the code. Count the
number of successive blinks and that's the code. Be aware that
there may be more than one trouble code stored, in which
case the next displayed code is different. There is
a 3 second pause between the codes. Codes will be repeated until
you remove the short in check engine connector.
4. Clear the codes by removing the "stop" fuse, or disconnect
the battery for at least 30 seconds.
Back to Toyota Engines *
Back to Automotive main page *
Back to Our home page